2024 Full Chip Scania VCI 3 Scanner Wifi V2.58.36 Scania VCI 3 Trucks Diagnostic Tool For Scania V2.53.5

Latest SDP3 Software is V2.58.3.6.0 For Scania TRUCK to 2024

Important Note : (If You Choose The Option "With SDP3 V2.58.36“）

1. Please Contact Us For the software download link after payment, then send your Remote Control Tool ID and password to us, we will install and activate the software for you.

2. After activation, we will not accept any refund reason, so please think carefully before you pay.

3. Before installing the SDP3 Software, please close your anti-virus software, or the SDP3 software would be damaged, we don't responsible for the result. If you want to install again, you need to pay again.

For Scania SDP3 Scanner Description:

1. For Scania VCI3 is designed to support all Scania diagnostic systems based on CAN network, it’s an extremely fast yet very compact diagnostic tool.

2. One of the most interesting new features that can be found in Scania VCI3 is a Wifi wireless connection (also there is a USB connector for wired connection).

3. From now you can work without wired connection to your truck, just forget these problems like damaged data cables and other disadvantages of wired connections.

4. Software support for Scania VCI3 appeared in Scania SDP3 2.18 version so if you want to use this tool you need this version of SDP3 or later versions of this software.

5. The device is designed for full-service trucks, buses and other heavy vehicles, which produces the corporation SCANIA. Adapter works in conjunction with software SDP-3.

6. The adapter does not work with trucks and engines manufactured before 2004.

7. The main feature of VCI-3 - Work through a high-speed WI-FI connection. Also in the device has a USB port.

For Scania VCI 3 Scanner Features:

1. WLAN version 802.11b/g

2. Encryption protocols: WPA2/WPA/WEP128/WEP64

3. USB 2.0 (compatible with USB 1.1)

4. Lightweight aluminum housing with IP67 protection

5. Polyurethane cables for extreme conditions.

6. Operating voltage CAN BUS (7 - 40V DC)

For Scania VCI 3 Scanner Functions:

1. Check and adjustements

2. Conversion

3. Maintenance

4. Campaign

5. Bodywork

6. Fault Codes

7. Fault Reporting

8. Programming of Control units

Need Netframework 4.5 installed on system.

In order to install SDP3, administrator rights are required.

UPDATE ECA Please also see Scania Ti 04-14 02 16 for more information about background and regarding the update process.

SOPS EDITOR INCLUDED:

Download with SDP3 from truck SOPS export file;

Decrypt SOPS export file to XML format;

Edit XML file with any XML editor;

Modify more than 300 parameters: like AdBlue, EGR, NOx Control, see whole list;

Encrypt XML file to SOPS import file;

Upload SOPS import file to truck with SDP3;

Scania XCOM - is a diagnostic tool to read, save and modify ECU data such as trouble codes, parameters, statistic data etc. VCI2/VCI3 interface is used to connect to ECU via CAN protocol.

Supported modification of ECU data of the following types:

EMS – Engine management system.

GMS – Gearbox management system.

RET – Retarder system.

AWD – All wheel drive system.

CLS – Clutch Control.

EEC – Exhaust Emission Control.

COO (COO7) – Coordinator.

BWS (BCI1) – Bodywork system

Supported resolving trouble codes to text descriptions for the following types:

EMS (S6, S7, S8).

GMS (OPC4, OPC5).

RET (RET1, RET2).

AWD (AWD1).

EEC (SCR1, EEC3).

COO (COO6, COO7).

HMS (HMS1).

Some other options:

AdBlue ON/OFF.

EGR ON/OFF.

Chassis ID/VIN Change.

Immobilizer ON/OFF.

Truck Power INCREASE.

ECU Recovery.

ECU Reset.

ECU Unlock.

PCB Display: